Characteristics of canopy interception and its simulation with a revised Gash model for a larch plantation in the Liupan Mountains,China

Canopy interception is a significant proportion of incident rainfall and evapotranspiration of forest ecosystems. Hence, identifying its magnitude is vital for studies of eco-hydrological processes and hydrological impact evaluation. In this study, throughfall, stemflow and interception were measured in a pure Larix principis-rupprechtii Mayr.(larch) plantation in the Liupan Mountains of northwestern China during the growing season(May–October) of 2015, and simulated using a revised Gash model. During the study period, the total precipitation was499.0 mm; corresponding total throughfall, stemflow and canopy interception were 410.3, 2.0 and 86.7 mm,accounting for 82.2, 0.4 and 17.4% of the total precipitation, respectively. With increasing rainfall, the canopy interception ratio of individual rainfall events decreased initially and then tended to stabilize. Within the study period, the simulated total canopy interception, throughfall and stemflow were 2.2 mm lower, 2.5 mm higher and0.3 mm lower than their measured values, with a relative error of 2.5, 0.6 and 15.0%, respectively. As quantified by the model, canopy interception loss(79%) mainly consisted of interception caused by canopy adsorption, while the proportions of additional interception and trunk interception were small. The revised Gash model was highly sensitive to the parameter of canopy storage capacity,followed by the parameters of canopy density and mean rainfall intensity, but less sensitive to the parameters of mean evaporation rate, trunk storage capacity, and stemflow ratio. The revised Gash model satisfactorily simulated the total canopy interception of the larch plantation within the growing season but was less accurate for some individual rainfall events, indicating that some flaws exist in the model structure. Further measures to improve the model's ability in simulating the interception of individual rainfall events were suggested.     

Vegetation cover density and disturbance affected arbuscular mycorrhiza fungi spore density and root colonization in a dry Afromontane forest,northern Ethiopia

Arbuscular mycorrhiza fungi(AMF) are vital in the regeneration of vegetation in disturbed ecosystems due to their numerous ecological advantages and therefore are good indicators of soil and ecosystem health at large. This study was aimed at determining how the seasonal, vegetation cover density, edaphic and anthropogenic factors affect AMF root colonization(RC) and spore density(SD)in Desa'a dry Afromontane forest. AMF RC and SD in the rhizosphere of five dominant woody species, Juniperus procera, Olea europaea, Maytenus arbutifolia, Carissa spinarum and Dodonaea angustifolia growing in Desa'a forest were studied during the rainy and the dry seasons in three permanent study vegetation cover density plots(dense, medium, and poor). Each plot(160 x40 m~2) has two management practices(fenced and unfenced plots) of area. A 100 g sample of rhizosphere soil from moisturefree composite soil was used to determine spore density.Spore density ranged from 50 to 4467 spores/100 g soil,and all species were colonized by AMF within a range of 4–95%. Glomus was the dominant genus in the rhizosphere of all species. Vegetation cover density strongly affected SD and RC. The SD was significantly higher(p 0.05) in the poor vegetation cover density than in the other two and lowest in the dense cover; root colonization showed the reverse trend. Management practices significantly(p 0.05) influenced AMF SD and RC, with the fenced plots being more favoured. Seasons significantly(p 0.05) affected RC and SD. More RC and SD were observed in the wet period than the dry period. Correlating AMF SD and RC with soil physical and chemical properties showed no significant difference(p 0.05) except for total nitrogen. Disturbance, vegetation cover density, season and total nitrogen are significant factors that control the dynamics and management interventions to maintain the forest health of dry Afromontane forests.     

How does organic matter affect the physical and mechanical properties of forest soil?

Determining the physical and mechanical properties of soil and its behavior for engineering projects is essential for road construction operations. One of the most important principles in forest road construction, which is usually neglected, is to avoid mixing organic matter with road materials during excavation and embankment construction. The current study aimed to assess the influence of organic matter on the physical properties and mechanical behaviors of forest soil and to analyze the relation between the amount of organic matter and the behavior of forest soil as road material. A typical soil sample from the study area was collected beside a newly constructed roadbed. The soil was mixed with different percentages of organic matter(control treatment, 5, 10, and 15% by mass) and different tests including Atterberg limits, standard compaction, and California bearing ratio(CBR) tests were conducted on these different soil mixtures. The results showed that soil plasticity increased linearly with increasing organic matter.Increasing the organic matter from 0%(control) to 15%resulted in an increase of 11.64% of the plastic limit and 15.22% of the liquid limit after drying at 110 ℃. Also,increasing the organic matter content reduced the soil maximum dry density and increased the optimum moisture content. Increasing the organic matter from 0 to 15% resulted in an increase of 11.0% of the optimum moisture content and a decrease of 0.29 g/cm~3 of the maximum dry density. Organic matter decreased the CBR, which is used as the index of road strength. Adding 15% organic matter to the soil resulted in a decrease of the CBR from 15.72 to 4.75%. There was a significant difference between the two drying temperatures(60 and 110 ℃) for the same organic matter mixtures with lower water content values after drying at 60 ℃. The results revealed the adverse influence of organic matter on soil engineering properties and showed the importance of organic matter removal before excavation and fill construction.     

Coinoculation of bioinoculants improve <Emphasis Type="Italic">Acacia auriculiformis</Emphasis> seedling growth and quality in a tropical Alfisol soil

We conducted a study to find out if arbuscular mycorrhizal (AM) fungi (Acaulospora scrobiculata, Scutellospora calospora) and phosphate solubilizing bacteria (PSB, Paenibacillus polymyxa) inoculation either individually or in combinations can improve Acacia auriculiformis seedling growth, uptake of nutrients and quality in a phosphorus deficient tropical Alfisol. The seedlings were assessed for various growth and nutrient uptake parameters after 60 days of treatment. Inoculation with P. polymyxa stimulated mycorrhizal formation. Seedling height, stem girth, taproot length, number of leaves and leaf area, plant dry matter production, nodulation, and nodular dry weight were significantly higher for seedlings that were either dual inoculated or triple inoculated compared to individual inoculation of AM fungi or PSB, and uninoculated seedlings. Dual and triple application of AM fungi and PSB also significantly improved the nutrient contents of shoots and roots and nutrient uptake efficiencies. The calculated seedling quality indexes of the AM fungi and PSB inoculated seedling were 25–208% higher than uninoculated seedlings. These findings show that A. auriculiformis seedlings when dual inoculated or triple inoculated performed better than seedlings inoculated with the microbes individually and compared with uninoculated control seedlings. We conclude that bioinoculation is important for the production of high-quality A. auriculiformis seedlings in tree nurseries for planting in nutrient deficient soils.     

Genetic diversity and population structure analysis of <Emphasis Type="Italic">Pistacia</Emphasis> species revealed by <Emphasis Type="Italic">phenylalanine ammonia</Emphasis>-<Emphasis Type="Italic">lyase</Emphasis> gene markers and implications for conservation

Information on population genetic structure and crop genetic diversity is important for genetically improving crop species and conserving threatened species. The PAL gene sequence is part of a multigene family that can be utilized to design DNA marker systems for genetic diversity and population structure investigation. In the current study, genetic diversity and population structure of 100 accessions of wild Pistacia species were investigated with 78 PAL markers. A protocol for using PAL sequences as DNA markers was developed. A total of 313 PAL loci were recognized, showing 100% polymorphism for PAL markers. The PAL markers produced relatively more observed and effective alleles in Pistacia falcata and Pistacia atlantica, with a higher Shannon’s information index and expected heterozygosity in P. atlantica, Pistacia vera and Pistacia mutica. Pairwise assessment of Nei’s genetic distance and genetic identity between populations revealed a close association between geographically isolated populations of Pistacia khinjuk and Pistacia chinensis. The accessions of wild Pistacia species had more genetic relationship among studied groups of species. Analysis of molecular variance indicated 19% among-population variation and 81% within-population variation for the PAL gene based DNA marker. Population structure analysis based on PAL revealed four groups with high genetic admixture among populations. The results establish PAL markers as a functional DNA marker system and provide important genetic information about accessions from wild populations of Pistacia species.     

The effect of low-temperature event on the survival and growth of <Emphasis Type="Italic">Juglans mandshurica</Emphasis> seedlings within forest gaps

In forest ecosystems, gap formation changes the allocation of abiotic resources and thus affects the survival and growth of understory plants. However, how tree seedling survival and growth respond to low-temperature events and the influencing mechanisms remain unclear. To clarify how low-temperature event limits the survival and growth of tree seedlings in the montane regions of eastern Liaoning Province, northeast China, we investigated temperature and light intensity within secondary forest gaps, and the survival and growth of Juglans mandshurica seedlings after a low-temperature event in the spring of 2014. Damage to seedlings due to low temperature significantly varied in different aspects. Seedlings in gaps on southeast-facing slopes were the most seriously damaged, followed by those in gaps on northeast-facing slopes. In contrast, seedlings in west-facing gaps and in control plots without slope aspect were not damaged. The freezing injury index for seedlings was negatively correlated with minimum temperature (r = ? 0.608, P < 0.01), but it was positively correlated with light intensity (r = 0.818, P < 0.01). In addition, height and root collar diameter of damaged seedlings were significantly lower than those of the undamaged seedlings (P < 0.01) during the early growing season (April–July), but no significant difference were observed during the late growing season (July–October) (P > 0.05). The extent of seedling damage was directly related to slope aspect. Low temperature and high light intensity were found to be the dominant factors affecting extent of damage to seedlings on southeast- and northeast-facing slopes.     

Variation of soil enzyme activity and microbial biomass in poplar plantations of different genotypes and stem spacings

To improve the productivity of poplar plantations, a field experiment of split-plot design with four tree spacings and three poplar clones was established, and four soil enzyme activities and microbial biomass were monitored in the trial.Soil enzyme activities, in most cases,were significantly higher in topsoil(0–10 cm) than in lower horizons(10–20 cm).Soil cellulase, catalase and protease activities during the growing season were higher than during the non-growing season, while invertase activity followed the opposite trend.Soil invertase, cellulase and catalase activities varied by poplar clone but soil protease activity did not.Cellulase and protease activities in the plantation at 5×5 m spacing were significantly higher than in the other spacings.The highest catalase activity was recorded at 6×6 m spacing.At the same planting density, invertase activity was greater in square spacings than in rectangular spacings.Soil microbial biomass was also significantly affected by seedling spacing and poplar clone.The mean soil MBC was significantly lower in topsoil than in the lower horizon, while MBN showed the opposite pattern.Significantly positive correlations were observed among soil cellulase, protease and catalase activities(p0.01), whereas soil invertase activity was negatively and significantly correlated with cellulase, protease and catalase activities(p0.01).Soil microbial biomass and enzyme activities were not correlated except for a significantly negative correlation between soil MBC and catalase activities.Variations in soil enzyme activity and microbial biomass in different poplar plantations suggest that genotype and planting spacing should be considered when modeling soil nutrient dynamics and managing for long-term site productivity.     

The effects of phenolic acid on nitrogen metabolism in <Emphasis Type="Italic">Populus</Emphasis> × <Emphasis Type="Italic">euramericana</Emphasis> ‘Neva’

The declines in soil fertility and productivity in continuously cropped poplar plantations are related to phenolic acid accumulation in the soil. Nitrogen is a vital life element for poplar and whether the accumulation of phenolic acid could influence nitrogen metabolism in poplar and thereby hinder continuous cropping is not clear. In this study, poplar cuttings of Populus × euramericana ‘Neva’ were potted in vermiculite, and phenolic acids at three concentrations (0X, 0.5X and 1.0X) were added according to the actual content (1.0X) in the soil of a second-generation poplar plantation. Each treatment had eight replicates. We measured gas exchange parameters and the activities of key enzymes related to nitrogen metabolism in the leaves. Leaf photosynthetic parameters varied with the concentration of phenolic acids. The net photosynthetic rate (P_N) significantly decreased with increasing phenolic acid concentration, and non-stomatal factors might have been the primary limitation for P_N. The activities of nitrate reductase (NR), glutamine synthetase (GS) and glutamate synthase (GOGAT), as well as the contents of nitrate nitrogen, ammonium nitrogen, and total nitrogen in the leaves decreased with increasing phenolic acid concentration. This was significantly and positively related to P_N (P < 0.05). The low concentration of phenolic acids mainly affected the transformation process of NO₃^? to NO₂^?, while the high concentration of phenolic acids affected both processes, where NO₃^? was transferred to NO₂^? and NH₄⁺ was transferred to glutamine (Gln). Overall, phenolic acid had significant inhibitory effects on the photosynthetic productivity of Populus × euramericana ‘Neva’. This was probably due to its influence on the activities of nitrogen assimilation enzymes, which reduced the amount of amino acids that were translated into protein and enzymes. Improving the absorption and utilization of nitrogen by plants could help to overcome the problems caused by continuous cropping.     

In vitro propagation of conifers using mature shoots

Micropropagation mostly leads to the production of innumerable true-to-type plants. However, establishing pathogen-free explants through in vitro culture requires a precise management of time for the exposure of explants to antimicrobial chemicals. The application of antimicrobial chemicals must also be managed to impose the least injury on explants. This review discusses the contributions of micropropagation procedures, explant types, subculture duration, media ingredients and plant growth regulators to the in vitro response of conifer explants. Even though regeneration from mature conifer explants such as mature shoots are laborious, the chances of variation, induced in vitro, are unlikely.     

Black locust (<Emphasis Type="Italic">Robinia pseudoacacia</Emphasis> L.) as a multi-purpose tree species in Hungary and Romania: a review

Black locust (Robinia pseudoacacia L.) was the first North-American tree species imported to Europe at the beginning of the seventeenth century. It is commonly planted worldwide because of its adaptability to environmental stresses, its valuable wood, easy propagation, frequent and abundant seed production, excellent coppicing, high seedling survival, and relatively high wood yield. In Europe, Romania and Hungary have the most highly-developed black locust growing techniques and experiences. As a result of increasing interest in black locust in many countries, this review aims to provide a comprehensive overview of state-of-the-art site requirements, propagation, improvement and management (including growth and yield as well as use in energy plantations).